Attività

鈪?LX- 6E Auto Bottle Blowing Machine Advantages
2.1 New Auto Preform Unscrambler System
鈼廜ur machine adopts one-way preform-feeding structure and preform-separating is powered by servo motor structure that helps solve the preform block and abrasion problem.
鈼廡here is one photoelectric sensor to monitor the preform-loading and preform-separating process that will warn the operator to add the preforms into the hopper when lacks preform instead of stopping the machine.
2.2 New Heating System
lPerfect heating system design helps decrease the power consumption.
lSpecial oven design helps power saving and is easy maintain.
lEach lamp鈥檚 position and temperature can be adjusted according to clients鈥?needs.
lCooling water circular system helps keep the oven temperature constant.
2.3 The Application Of Servo System On Main Transmission
The transmission system adopts the special chains and is powered by servo motor, which helps orientate the preform heating base quickly, accurately and steadily when the machine starts running.
2.4 Servo Technology Innovation On Clamping System
鈼廠ervo technology is applied in the clamping system, which can shorten the mould-clamping time and improve productivity.
鈼廐igh pressure mold-locking unit helps solve the swelling mold and big joint line problems.
2.5 Easy To Change Bottle Shape
Drawer type mold structure design makes it easy to change the mold. Within one hour, a mold can be replaced under the condition of the same bottleneck diameter.
2.6 Intelligent Human-Machine Interface
lHuman-machine interface control, easy operating and monitor.
lLive production information supervision and auto record production data everyday
lFailure warning and troubleshooting.
鈪?LX-6E Machine Technical Parameter
3.1 Technical parameter
Item LX锛?
Main machineMaximum Bottle capacity700ml
Maximum bottle diameter桅68mm
Neck diameter桅18~38mm
Maximum bottle height under neck<240mm
Maximum preform height under neck<115mm
Clamping stroke100mm
Bottom die stroke25mm
Bottle pitch76.2mm
Maximum output rate (bph)6,600
Number of molds6
Heating partNumber of heating modules4
Number of heating lamps8
Number of preform bases108
Electric partVoltage380V
Frequency50/60Hz
Service power24~36kw/h
Installation power70kw
Air sourceLow pressure1Mpa
Low pressure air consumption3m鲁/min
High pressure3.5Mpa
High pressure air consumption4鲁/min
Chilled water
(Water temperature 鈮?8鈩?Pressure2~4bar
Flux6m鲁/h
WeightG.W.Around 6,000kg
DimensionMain machine (L脳W脳H)4100脳2300脳2300mm
Preform unscrambler(L脳W脳H)2800脳2800脳3000mm
Remarks:
*6600bph output rate base on 555ml, 18 gram C鈥檈stbon water bottle.
*High pressure air consumption depends on PET bottle volume.
3.2 Main component list
No. Name Origin Brand
Electric/control component
1Mold-clamping servo motorJapanYASKAWA
2Stretching servo motor
3Main transmission servo motor
4Preform-divided serve motor
5Servo driverButton
6Air switchFranceSCHNEIDER (TE)
7Contactor
8Intermediate relayJapanOMRON
9PLC
10PLC expand module
11Touch screenTaiwanPanel
Valves/adaptor
1Pre-blowing valveUSAPARKER
22nd blowing valve
3Exhaust valve
4One-way valve
5Pressurizing mold-locked motion valve
6Step chainTaiwanKMC
7Mold-clamping lead railTaiwanABBA
Remarks: all above component are imported with original packaging. Longsun has the right to change the default parameter according to the marketing change or customer special requirement without further notification, a 5% change of the equivalent parameter will be allowable against the marketing trend and the spare parts supply condition!)
FAQ
1.Any guarantee of the machines?
The guarantee of our machines is one years, also we will send some easy-broken spare parts along with the machines for free.
2.Can you offer the installation and training for the machines?
We recommend you to send your engineers to our factory for training. It is free of charge and it is the good way to make sure that your engineer firstly know our machine well, then they can operate and maintain the machines properly.
We can send our engineer to your factory to install the machines and train your engineers, but this service is not free of charge and the fee is USD100/day/engineer.
3.How about the package
Wooden base, vacuum treated and water-proof plastic outside package(machines), wooden box(spare parts, chillers etc.)
4.Delivery time
Standard models are around 45 working days, hybrid models are 90 working days, customized models are 90-120 working days.
5.Shipping port
Shenzhen or Guangzhou port
6.The main transport
Sea transportation, also train and truck transportation are available.
7.What鈥檚 the main trade terms
F group and C group
8.What鈥檚 the payment
T/T,L/C,Western Union.
9.What鈥檚 the billing currency
USD
10.Accept OEM or not
Accept(machine quantity at least 5 sets)
11.Whether to accept pre-shipment inspection
Yes.
12.Whether to accept a third-party company inspection before shipment
Yes
13.Does the machines have any certificates
Yes, CE certificate.
14.What鈥檚 the minimum order quantity?
1 set.Customized 0.75L Edible Oil Bottle Blow Moulding Machine
website:http://www.bottleblowmouldingmachine.com/servo-linear-blow-moulding-machine/0-75l-edible-oil-bottle-blow-moulding-machine/