Attività

Title锛?/strong>mirror stainless steel of Passenger Elevator
Description锛?/p>
Mirror stainless steel of Passenger Elevator, high-quality Mirror stainless steel material of car panel,which is very popular and modern, widely used in office buildings, government buildings, housing and other buildings.
HD-JX06
Ceiling: Mirror stainless steel framework, acrylic arched top plate, LED light
Car wall: Stainless steel hairline on both sides, combination of stainless steel hairline and hairline mirror at rear wall Floor: Standard PVC(optional marble)HD-JX12
Ceiling: Diamond silver painted steel with (HD-DTA01)acrylic photic board.
Car wall: Hairtine stainless steel
Operating panel: Integrated operating panel (HD-C12)
Floor: PVC (FJ-B01)
Ceiling: Mirror frame, supplemented by led on mirror stainless steel plate, the middle section is arched white plate light lighting design
Car wall: Center plate mirror etched stainless steel, two flanks hair grain stainless steel
Handrail: Stainless steel flat handrail
Floor: Standard PVC(optional marble)
Dooropeaning button(esternal)
Door remaining open when the door opeaning button was pused on.
Automatic turn off lighting and fan
Lighting and fan will cut off power automatically without any call or indication in 3 minutes.
Definition: it is used to connect elevator car and counterweight, balance the weight of traction rope and traveling cable, and balance the operation of elevator.
During the operation of the elevator, the length of the wire rope at the car side and counterweight side is constantly changing, which causes the weight change of the wire rope on both sides of the traction wheel. When the car is at the lowest landing, most of the weight of the wire rope acts on the car side; when the car is at the highest landing, most of the weight of the wire rope acts on the counterweight side. When the lift height is small, this change has little impact on the operation performance of the elevator, but when the lift exceeds a certain height, it will seriously affect the stability of the elevator operation and endanger the safety of passengers. Therefore, when the lifting height of the elevator exceeds a certain height, it is necessary to set up parts with a certain weight to balance the weight change caused by the height change, which is the elevator balance compensation chain. ”
Under what circumstances should a balanced compensation chain be set up
Due to the different traction conditions of each elevator, a fixed value can not be used as the critical lifting height of the balance compensation chain. The critical lifting height of the balance compensation chain should be determined according to the traction conditions of each elevator to ensure that the steel wire rope will not slip when the elevator is in the car loading condition and emergency braking condition. At present, according to the practical experience of engineering installation, it is generally necessary to install compensation chain (rope) when the lifting height is more than 30 meters. In practical application, due to the different types, loads and environments of elevators, it is only for reference to set the critical lifting height according to the actual experience method. “China Passenger Elevator manufacturers
website:http://www.huzhoufuji.com/passenger-elevator/